How to load spring forming machine into 20FR container

Spring forming machine cargo must load onto 40’ Flatrack in such a way that the
overall gross cargo length stays within the external
length of 40’ flatrack. That is, no protrusion/over-length
at either end of the flatrack is allowed. 
Header boards / end posts
must stay upright after
cargo is loaded onto
flatrack.In addition, corner
castings at four corners
must be freely accessible
for lifting.
To avoid hitting cell guide
for under-deck stow, a
minimum of 35 cm
clearance is needed at 4
corners between flatrack
wall and closest point of
protrusion.